0Item(s)

You have no items in your shopping cart.

Product was successfully added to your shopping cart.

WG Calibration - CLKA2 Kits Series

Two Precision Fixed Loads Calibration support TRL and SSLT calibration method 

Features

    Two Precision Fixed Loads

   0.75 to 110GHz

   WR975 Through WR10

    Fixed Load Calibration

   Support TRL and SSLT Calibration Method

   Keysight (Agilent), Anritsu and Rohde & Schwarz VNAs Supported

Description

The A-INFO CLKA2 Series Calibration Kits are waveguide kits designed to provide accurate TRL(Thru-Reflect-Line) calibration of VNA for measurement in rectangular waveguide from WR975 to WR10 (0.75 to 110GHz). CLKA2 Series Calibration Kits provide all the necessary components for an accurate TRL calibration. In addition to TRL calibration, CLKA2 Series can also make SSLT(Short-Short-Load-Thru) and offset load calibration. All kit components have both standard flange and precision flange(APF Series).

Components included in CLKA2 Series Waveguide Calibration Kits

QTY

Description

Notes

2

WG to Coaxial Adapter

Refer below table for each WG band.

2

Precision fixed termination

Two terminations for CLKA2 series.

1

1/4-λ Spacer (shim)

-

1

Fixed (reference plane) Short

-

1

Verification Standard***

Optional, not included in standard Model.

1~3

Screw Pack

Qty is depending on WG band.

1

Dowel Pack*

For APF flange only.

1

Hex Ball Driver

-

1

Calibration Software**

-

1

Carrying Case

-

Notes: 
*Indexing refer  Precision Flange (APF)

**Calibration Software currently supports Keysight 872x Series, PNA Series, Anritsu and Rohde&Schwarz ZVx Series . Please ask A-INFO for more information when place order.

***Verification Standard is suggested used for WR28,WR22,WR19,WR15,WR12,WR10 Calibration Kit.

Model Information

   

Example Part Number: 

430 CLKA2 -XABAB _DP

Waveguide Size: WR 975  to WR10

   

Product Code,  CLKA2 Series WG Calibration Kits

Test Port Adapter  Connector Option :
X:  Connector type, S for SMA; N for N type; 3.5 for 3.5mm,  K for  2.92mm, 
2.4 for 2.4mm, 1.85 for 1.85mm.
A:  Type for WG to coaxial adapter, R for Right Angle, E for Endlunch.
B:  Gender for each adapter, F for female, M for Male.
For Example: -SRFEFS means the connector type of WG to coaxial 
adapters in Calibration Kits is SMA. RF means one adapter is  Right Angle 
with  Female connector,  EF  means  another one is  Endlaunch with  Female 
connector.
Order Kits with no Adapter Option:  use  -0, For example 90CLKA2-0_PB (Note: Each model listed below can offer "-0" option)
Order kits with Two WG/WG Test Port Adapters Option: use -1
(Note: No WG to Coaxial Adapter in "-1" option) 

Flange Code, refer below model list table.
Set Descending Direction

    Table

Items 1 to 40 of 186 total

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
Set Descending Direction

    Table

Items 1 to 40 of 186 total

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5